Bathroom Accent Wall




I travel a lot for work, and I've always loved lighted mirrors in hotels, so I knew I had to have one in my home.   I had a lot of trouble finding one of the light up mirrors that was also a medicine cabinet.  I eventually found this one on Wayfair, and I absolutely love it. I bought this mirror in 2019 and there were not a lot of affordable options for lighted mirror medicine cabinets.  However, now they are more popular and many more options out there and this one is no longer available. 

On the wall behind the mirror I decided to put these herringbone peel and stick tiles from Amazon for an accent wall.

Herringbone Peel and Stick Tiles

They were really easy to cut with scissors, and apply to the wall.  However, the adhesive was VERY strong.  Once you put it on the wall, it's not coming off easily. I lightly placed all of the tiles and made sure that they were in the right spot before fully pushing down.  I read some reviews on Amazon that people added grout between the tiles to give a more cohesive look, I chose not to do this because I have commitment issues and I wanted to be able to remove it more easily if I decide to change it in the future.  

I loved the way that it turned out, it did take me probably 10+ hours to apply to this wall, but I was very particular cutting around the obstacles and applying the tiles individually in some places.  

Disclaimer: Amazon links are affiliate links.




Comments

Post a Comment

Popular posts from this blog

Removing a non-load bearing wall

Image
The first thing I did when I moved into the house, before I moved my furniture in because I knew it would be a mess, was removing the wall between the "den" and the living room.   Disclaimer: the only reason I knew it was safe to attempt this and the wall was non-load bearing is because every other house on the street was built the same way and this wall was added by a previous owner.  It was still framed as a cutout with drywall in the middle.  Don't attempt to remove any wall that you are unsure if it is load bearing. This was my first ever DIY attempt at anything, and I did not go about it well.  I should have bought the proper tools, but instead, I demolished the wall with nothing other than a hand saw I purchased from Dollar Tree and a razor blade.   First I cut into the drywall with the razor to look inside and see what I was working with.  It was nothing more than a couple of 2x4s to hold the drywall in place, so I used the saw/razor blade ...
Read more

Kitchen Cabinets

Image
  Covid was the first time that I had to spend an extended amount of time in my house, and I set up my home office in the kitchen and I realized how much I hated it.  I had always planned on painting the cabinets, but the catalyst to take action was staring at them all day for 9 hours and no social plans to distract me.  I had read that painting cabinets was more difficult than expected, and that definitely proved to be true.  It took so many hours, I lost track- at least a few weeks of continuous work.  The wood grain on my cabinet doors was very prominent, so it took a lot of wood filler and sanding to remove the grain enough to paint.   I started by removing all of the cabinet doors, applying wood filler, then sanding.  I did 3 rounds of this per cabinet, then I painted with primer and the wood grain was still too prominent.  Then, I wood filled and sanded, primed, wood filled and sanded again.  By that point, I was done. If I had to ...
Read more

Front Porch

Image
One of the main selling points of the house was the front porch. I've always dreamed of having a front porch to sit out and watch the rain.  The front porch also happened to be one of the most neglected parts of the house.  If the overhang of your porch does not extend far enough out from the floor of the porch, then the wood on the edge will start to rot.   The first thing I did was create a gate because I have 2 dogs and live on a busy road, so I was very paranoid about the dogs running out into the street.  I also wanted to be able to sit out on the porch with the dogs without worrying about a leash.  The next thing that needed to get repaired was the floor of the porch.  One night I looked out the window and saw a big Baltimore rat climbing into the hole in the porch, and the next day I needed to do something about it.  There was a subfloor under the boards, so I used a circular saw to just cut through the layer of boards, without cutting into...
Read more